J'ai comme l'impression que c'est le micro du mobile qui reste actif et non pas les autres sources car quand je le rapproche de ma bouche, on m'entend nettement mieux. J'ai tout de même également l'impression que ce problème est aléatoire en tout cas je n'arrive pas à définir clairement le problème, d'où ce post. Avez-vous aussi ce genre de problème? Bonjour , avez vous tenté de le réinitialiser?
Bonsoir, Je viens de le faire avec la nouvelle build de la Je verrai à l'usage si c'est toujours pareil et je vous tiendrai informé. Merci dans tous les cas. Bonsoir, Alors ça ne change rien du tout. On a toujours autant de mal à m'entendre. Je vais prendre un rdv en Apple Store pour ce problème je pense, surtout que cela le fait depuis que je l'ai.
- iPhone 7 Plus Speaker and Microphone Mesh Set - iFixit;
- iPhone 7 Plus - Problème de micro ? | Les forums de MacGeneration.
- It's time to speak out for your right to repair?
- Un problème de micro sur votre iPhone 7 suite à la mise à jour vers iOS 11.3 ?.
- logiciel espion pour iphone 6s sans jailbreak.
- ecouter sonnerie de portable.
- localiser un telephone via un numero.
Un autre avis sinon? Bonjour, Je viens apporter quelques updates: Je suis allé directement en Apple Store à la Genius Bar, et ils m'ont dit après des tests: Bon, j'ai un peu eu l'impression que l'on me disait: Bref, j'ai commandé une nouvelle carte SIM chez mon opérateur Sosh , on vera bien la suite mais je ne crois pas une seconde que cela vienne de là. Bonsoir, Actuellement j'ai le même problème avec mon iphone 7 plus acheter chez mon FAI il y a 3 semaine de ça, chez moi le téléphone à l'oreille on a du mal à m'entendre, il faut que j'enlève la coque Apple et on m'entend mieux.
J'aimerais savoir CostaDelSol si vous avez réussi à résoudre votre problème et comment? D'avance merci pour votre aides Salutations. Sp , 2 Avril Bonsoir, J'ai changé de carte SIM et depuis ça va nettement mieux. The orange plate with wire traces on all four corners. I agree with your assessment that the 56mm lens is just a focusing voice coil and is not stabilized. One camera is a 28mm F1. I am not sure how it is dealt with when in between X but beyond 2x is "digital zoom" which is essentially cropping the native file of the longest lens. However, the combination of a 28mm and a 56mm lens is not a weak addition to the already great iPhone camera platform.
I plan on using it a lot and making a lot of great images with it when not using my professional gear, for my profession. I know it's Apple's term, but the non-wideangle camera is not, by any definition, "telephoto". It's actually a "standard" lens, roughly equivalent to a 55mm lens on a 35m camera.
Technically it is a telephoto as are all phone lenses - telephoto means that the lens is shorter than its effective focal length whereas on slrs wide angle lenses have to be reverse telephoto to clear the mirror. It is a telephoto of normal focal length, like the pancake lenses fitted to a number of digital cameras.
A telephoto lens has a focal length longer than that of the track length of the lens assembly. Apple is using the term correctly. I'd like to know what the camera module is, and what the pixel size is. In the announcement, they stated "bigger pixels" but never said how big. Could you please tell us what the image sensor is? And I don't see any discussion of the front sensor here, though perhaps I'm just missing it. Smartphones even iPhones suffer from image noise during low light shooting. They use very small image sensors which can't gather enough light fast.
So the software amplifies digitally the ISO creating image noise and deteriorating colors. I would prefer a bigger camera with a bigger image sensor with better image stabilization instead of two cameras. Ordinary users are impressed more from the two cameras and don't know the benefits of bigger image sensors. The comments below this article indicate the telephoto lens does indeed have OIS. But the comments above my post say otherwise.
What is the final conclusion? Would there be a way to turn off the hardware OIS by doing into the machine? Some people with stabilizing gimbals are finding the hardware OIS troublesome by causing jitters on video capture. Apple has not enabled a way to completely turn off hardware OIS. Any chance of being able to replace the camera glass? It's built into the chassis but looks like it could be removed and replaced. Avant de pouvoir retirer la carte mère du boîtier, nous devons retirer plusieurs parties de l'unité d'antenne, y compris le câble flexible de l'antenne, qui fait le lien entre les circuits de l'antenne.
Une fois le câble flexible de l'antenne retiré, nous tournons notre attention vers l'antenne wifi située en haut à gauche. These both appear to be Squelch pads. The second image is the shielding cover over the second. The antenna is the upper case its self. Unlike the iPhone 6 series which had two antenna's in the top case this series shares the same antenna for both cellular and WiFi. Its possible they also have so attenuator logic here as well. What's with all the tooling marks in the pink? I thought the back is supposed to be as beautiful as the front? I hope the the new iPhone 7 with smaller visible antennas will have the same sensitivity as previous models.
Il est plus simple de retirer la carte mère de l'iPhone 7 Plus que celle de son prédécesseur. Il n'est pas nécessaire de retourner la carte mère pour détacher les dernières connections. Ce n'est peut-être qu'une mince victoire, mais elle nous donne du courage. Même les changements les plus minimes peuvent faire la différence en termes de réparabilité. En retirant les autocollants EMI, nous trouvons quelque chose qui ressemble à un système de gestion thermique supplémentaire. That EMI stickers are destroyed when are peeled off? Can they be reused with the same efficiency? Can they be replaced by better quality and more safe ones?
You guys seem to have ignored the above comment. But really is the EMI sticker replaceable? If so where can we get it? Les barrières sont levées! La carte mère est libre et prête à être inspectée. Voyons un peu ce que ce bijou renferme! It supports 4X4 MIMO, but the physical antennas have to be installed by the manufacturer, in this case, Apple would have to be sure to include the antenna set.
It is supposedly supported via software update, so it seems that might also depend on Apple.
The chip below the green one looks like a Murata one. It has its marker "M" with a circle. So Apple is advertising a Mbps maximum downlink throughput cat 9 or 10 but Qualcomm chipset at least, no idea for intel LTE baseband used is capable of Cat 12 , i. Maybe Apple is advertising Mbps because only Qualcomm chipset support it?
Obtenir de l’aide
Maybe it is firmware locked to ue cat 9 or 10? Looks like there is another chip hidden. Left side of A10chip, in between capacitors - try to xray or remove the material. This phone is a real beast. The one Gbyte of iPhone 6 plus isn't enough for multitasking with the new updates of apps. A really huge step forward. The gap between iPads and iPhone is closing. The Avago chips are really Broadcom chips. Avago announced its intention to acquire Broadcom in May The acquisition was completed in February Avago decided to exist under the Broadcom name, as it was more well known than the relatively new Avago which formerly was part of Agilent, which itself was a spin-off from Hewlett-Packard.
Here is also a link to the translated article. Here is another one Very surprised that Ifixit would miss such an identifiable chip. Especially after having so much time to correct it. Could something foul be afoot with the politics in which they "teardown"? Can't say for certain.
I just find it bizarre that no US teardown has identified this chip but several others internationally have. There are two similar parts on the main board. The wifi module is done by Murata again. And it seems to provide another chip above the blue one? Sameer Vora - There is only one. Not true - The 7 now has 4 part numbers: How is the Bluetooth antenna compared to the one on the 6S Plus?
Bluetooth performance is particularly important for me since I've invested in wireless earbuds with a weak RX. Of course there isn't place for an FM analog radio receiver. I will die and iPhones will still snob the traditional free analog radio. Mobile carriers love people paying for listening radio during commuting. Apple doesn't even produce an adapter for radio. One of the few topics that android phones are betters. The model is A according to the first post. This means this is the Japan model. If what I hear is correct, this means that the chips in this model are different than those around the world.
Et, comme toujours, nous remercions nos amis de Chipworks de nous avoir aidé à identifier les circuits intégrés clés en jeu! Découvrez leur démontage pour une analyse approfondie du matériel de contrôle de l'iPhone 7. En enlevant le haut-parleur du téléphone, nous trouvons de jolis contacts à ressort et un tissu avec protection étanche. En partageant des ressemblances de design avec les haut-parleurs du 6 Plus et du 6s Plus, celui de l'iPhone 7 Plus porte également une annexe d'antenne familière.
Des câbles très fins relient le connecteur Lightning aux microphones qui adhèrent solidement aux grilles du haut-parleur. Comme prévu, les grilles du haut-parleur sont équipées d'une protection contre l'infiltration d'eau pour garder les composants au sec. Et si vous ne l'aviez pas encore remarqué, ce connecteur Lightning est énorme! Comme pour les générations précédentes, il n'adhère pas trop fortement et peut être retiré rapidement du boîtier arrière. Il comprend également le joint le plus performant jamais rencontré sur un connecteur Lightning.
Alors que les modèles de l'année passée utilisaient une mousse adhésive pour protéger de l'eau et de la poussière, celui-ci est équipé d'un joint tout en caoutchouc, capable de retenir une colonne d'eau de 50 mètres. I thought the iPhone 7 models were IP67 - meaning they should withstand ingress from 1m of water for 30 minutes.
L'étanchéité a été prisée comme étant LA nouveauté de l'iPhone 7 Plus. Mais pourquoi est-il étanche?
Les faits le montrent partout:. Photo 1 et 2: Les joints en plastique et les bouchons ne sont pas forcément très innovateurs, mais ils protègent efficacement votre smartphone des liquides et de la poussière. Lors d'une réparation, vous devrez vous assurer que le joint est bien en place et qu'il est étanche, ce qui rend l'opération évidemment plus complexe. Nous mettons l'excavation du boîtier de côté, puis prenons un moment pour examiner l'écran et ses morceaux. De l'avant, il ressemble aux écrans x de l'iPhone 6 et 6s, nous notons quand même quelques changements.
Nous notons également un indicateur pour les dégâts de liquide accroché sur le bord gauche du blindage EMI de l'écran.
iPhone 7 et 7 Plus : un souci de micro depuis iOS
Ce gadget est peut-être résistant à l'eau, mais il semble qu'Apple ne veuille pas se mouiller si vous allez nager avec votre téléphone. Après avoir desserré quelques vis cruciformes standard, le haut-parleur tombe pratiquement du dessous de la caméra avant. Ce nouveau haut-parleur a une double tâche —pour la première fois, il sert également d'enceinte, ce qui permet à l'iPhone d'émettre un son stéréo pour les moments où vous avez besoin de vous déchaîner et que vous n'avez probablement pas d'endroit pour brancher votre écouteur.
La nappe de la caméra avant est un peu plus pénible. Mais par chance, il n'y a pas d'adhésif sur la plaque de protection LCD et les câbles sont bien agencés. Il n'y a pas grand chose à voir ici. C'est pourquoi nous retirons rapidement la plaque de protection et le bouton home. Contrôleur de capteur de capacité Analog Devices AD Pour ceux qui meurent d'impatience de le découvrir, il semblerait que ce solide bouton home soit entièrement remplaçable. L'opération ne sera pas forcément simple à cause des petites vis tri-point et de l'adhésif superficiel, mais il n'y a plus de joint délicat à remplacer.
Globalement, c'est un pas dans la bonne direction. Un bouton home à remplacer, c'est une bonne nouvelle pour les consommateurs. Le bouton home mécanique a posé des problèmes sur les iPhone précédents. Même si nos données montrent que le bouton home est plus fiable dans l'iPhone 6 et 6s que dans le 5 et le 5s, près de personnes ont déjà utilisé notre tutoriel de réparation pour bouton home de l'iPhone 6.
De plus, le passage à un bouton home non mécanique devrait en général améliorer la fiabilité et réduire le nombre de remplacements. Sans oublier que ça donne super bien aux rayons X. How is the home button waterproofed? It looks like it just sits on top of the glass but that can't be right The home button acts like a plug, with wedged sides pressing on the screen from above. The screw actually pulls the button in to seal tightly. If it doesn't 'move' for normal operation, why is the home button removable? I'm anxious to feel these in action. The home button still implements the touch ID circuitry so it needs to be removable in order to replace.
If I recall, not everyone can replace the home button on the previous iPhone because there was a chip on the cable that has some data that's tied to the specific motherboard apple citing that it was a security feature. Only a reprogram at Apple can "pair" a new home button to a phone. I wonder if this is like that? But without any moving parts, it's a lot more reliable of course. Cependant, les boutons volume et power sont bien nichés dans le boîtier, défiant le démontage conventionnel. Ce design rappelle les anciens brevets d'Apple pour boutons waterproof , et nécessite une technique de démontage musclée.
C'est la grande finale! Maintenant que l'iPhone 7 Plus est en morceaux, nous pouvons l'examiner de plus près.
Vue éclatée de l'iPhone 7 Plus
Mais pas pour longtemps. Un autre gadget de Cupertino nous attend bientôt. Restez connectés pour en savoir plus! Un grand merci à nos amis de Nikkei. Ils nous ont prêté leurs locaux à Tokyo pour faire ce que nous faisons le mieux! Ces traducteurs nous aident réparer le monde!
iPhone 7 Plus Speaker and Microphone Mesh Set
I'm like ifixit hasn't uploaded the first set of teardown and here we go. Has anyone tried to remove the home "button" yet? Worried about being able to transfer touch id to replacement screens I think the home button is still transferrable to replacement screen based on the screws right under its plate, it should have a small connector to the LCD assembly itself. That it what I am hoping based on the video that came out Wednesday, but then they did not remove it. I own a repair shop, I am sitting on the edge of my seat here ;. There appears to be a video posted on YouTube of a teardown that took place on the 13th.
The video description says it happened in Vietnam. It was obviously obtained illegally due to the obfuscation of the serial and IMEI info on the back of the phone. Re Home "button" replacement. I was under the impression a new "button" still needs to be calibrated to recognize all previous finger prints. I am not completely positive this is still the case. It's all about the modem here. Big thing is for me: How many antennas, 4x4?
But stupid Apple folks have restricted it to Mbps to match with inferior Intel modem on some models. Intel is Cat 10 modem capable of max Mbps. It appears the Home button is screwed in. The LCD shield looks like it will be fun to remove since the display cable is now in the middle left of it instead of at the top. I am zooming in trying to find a cable, so far I can't find one coming off the button. I know the folks at iFixit have to take their time and do a complete teardown and upload and type out info , I just wish they would skip ahead a little ; - We all know the logic board will come out ;.
The cable might be routed under the LCD back plate and thats what I am hoping, Apple will be insane having the home button built in the LCD assembly, maybe next year but not that year lol. Ya, It does have a resemblance to the iPad Mini 4 too oddly enough did two of those this week, of four total I have seen. We should all know very soon hopefully. We all know the fruit company would like to kill all the small repairs shops off and force people to their stores, but then again I am in a fairly large city with no store for 2.
The flex cable appears to go off on the right of the Home button and there seems to be an extension cable that connects to it near the rightmost screw. You can see a small bubble in the cable between the LCD shield and Home button shield??. OK, I see what your talking about. Their is also a little hump on the right that is probably the connection point.
Looking at the screw in the center of the button, maybe it comes out the front like the track-pad on a macbook. That shield should be lots of fun, I am betting the LCD flex is glued over. Yup that sounds right except that the screw is just sitting to hold the button on place and not to adjust its tactile feedback since its not mechanical. You got the right mate! Despite people's claims on the telephoto lens not having the OiS it's crystal clear from this teardown that it indeed does have one. No I don't think so, the electromagnetic coils of the 56mm unit only move the lens back and forth for focusing.
The 28mm unit you can clearly see the coils and the magnets that allow it to move side to side. We all have businesses for another year then Ed: Not like many of us get much Samsung business anymore Most of my customers faint or hang up when I tell them how much to fix an S7 Edge screen Looking into the freezing technique, but not eager to spend a could grand on a maybe Are we sure this uses a DAC and the lightning port isn't just capable of outputting an analog signal?
I've had one of these adapters since Thursday -- if I had know it was going to take this long, I would have just torn mine down and published the results on my own blog! The reveal of the third amp is a serious indicator Apple has modified its MFi specs, and now allows analogue output from Lightning. That's a HUGE deal. It becomes such a weird shape because Apple wants both a low-energy 3-axis and an accurate 6-axis in one module.
If my theory is right, the marker on that chip hints STM. Hey someone who knows why are you so sure? In the 6 there were two separate gyros, a Bosch 3-axis and an Invensense 6-axis: Is this a new part combo 3 and 6-axis? It appears to be an invensense chip. You can see it on the Chinese version Since the other link is now dead here is another! I wonder, if I teardown and reassemble again will it be water resistant after re-assembly? Are you sure home bouton is transferable: How does Apple get stereo from only one speaker? Or does the photo of the speaker in step 19 show a divider in the middle that "separates" two small speakers?
If so, how does one call this "stereo" when the two speakers are so close together? And why do the diagrams on Apple's website show lines pointing to the two grilles on the bottom of the phone, with the legend describing them as "Stereo speakers", when the iFixit teardown shows that the left-hand grille doesn't actually have a speaker behind it, contrary to Apple's diagram? And why do some of Apple's own diagrams point to a supposed second speaker towards the top of the phone, though the iFixit teardown found no such speaker there? The receiver speaker - that is, the speaker you hold up to your ear when you make a phone call, is the "second speaker" they're using for stereo sound now.
So it seems that the second speaker is a beefier version of the ear speaker at the top of the phone, shown above the display in step 5. Of course, if you have the phone sitting on a table and you're facing one of the two sides or the top end of the phone, you won't have a speaker pointed towards you, but you'll still have the front-facing speaker emitting sound up and out, and sound reflecting upward off the table from the bottom-facing speaker, so there will still be good diffusion of sound, and some stereo separation.
Or pretty rigid, like the 6S-plus? What type of aluminium have they used this year? We found not just 2 but 3 Audio Amplifiers - we speculate there is one audio amplifier for for each of the two speakers, and the third amplifier is for the headphone via the Lightning port. The third Audio amplifier is situated next to the Applications Processor Module with 3 black blobs on it. It was discovered during de-soldering of the A10 applications processor.
Chipworks discovered the third amp. Could you measure the dimensions of the A10 Fusion chip? That would be very useful calculation die size! Also, high-res photo's of the A10 would be much appreciated: Does anybody know if the 7 plus is using saphire glass? Or is it like it was shown in a video earlier on the regular 7 only using Gorilla Glass. You missed a third audio amplifier. Directly above the "A" in "A10" on the processor, there is a chip with 3 black blobs on it.
It's the amplifier for the lightning port to headphone adapter. Yes, that third amp is a significant discovery implying a major change to Apple's MFi specs. In which case its a huge reversal of position, and will lead to a flood of cheap analogue audio products previously not possible, not to mention significant confusion as to just exactly what a "Lightning" equipped product means.
That shouldn't have been necessary as Apple already has published Lightning audio specs -- unless they changed something significant. So suddenly its not an inexpensive digital adapter with a DAC and amp, its a very expensive port connector changer. Looks like we have most of the tools available RadioShack. Can somebody help crack my iPhone 6S encryption?? I forgot my passcode and only 2 more attempts before lock out.
The stereo speakers function in such a way, that if you do watch a video on your phone or if you tilt your phone sideways, there will be a left and right speaker, both working to create a stereo sound. Most people do use their iPhone sideways to view videos, so this will certainly be noticeable to them. I'd love to see a review of this. I can't imagine how they are going to make two different speakers sound the same, much less where one faces the listener, and the other points of to the side. It looks like a lot of the waterproofing is either a lost, or b significantly disturbed from the teardown.
With reassembly, do we have to completely remove the waterproofing and reapply? If not, does it go back together imperfectly, due to gobs of the waterproofing building up during disassembly? I wonder if you couldn't spray the entire internals with waterproofing, after the fact? Can anyone explain why Apple keeps changing their screw heads? I'm genuinely curious to know how this is better than torx or pentalobe. I was wondering if phones get taken apart for repairability grading, do any of these phones get put back together? I have read it uses the second generation Low Temperature Polysilicon backplanes, which in another article fueled a rumor that a higher resolution panel was going to used due to the power savings.
Is the lightening port data throughput the same as the previous iPhone 6s Plus, or the updated standard used in the iPad Pro? How about the flash lights? They claimed to be 4 LEDs. I have a question. Did Apple use any technology from printed electronics, like silver ink, in the latest iPhone? The Apple Watch must use a single 6 axis for everything to reduce power. This is what InveSense software specializes in and it has to be in the iWatch.
I found a write up on a Chinese site that shows the Invensense Chip. Also here is a pic of its location: Can anyone confirm if the camera lens cover and Home button are still sapphire? A few people have said, well, that they aren't. It's nice to see that others have already identified the InvenSense C but I wish iFixit had figured it out first.
Is this a living document?
- Vos commentaires.
- Si les microphones de votre iPhone, iPad ou iPod touch ne fonctionnent pas.
- application pour pirater facebook iphone!
- ou trouver sonnerie portable gratuite.
- logiciel espion rat.
Will additional chips and information be added as the rest of the world figures it out? Regardless, great teardown guys! Thank you for doing this year after year! It would be interesting to know who makes the microphone s. That's a small but important piece that few ever take much notice of.
Is the camera sensor same as on 6s plus? I'm asking about the pixel and resolution. Not just the 12 megapixel total resolution. I know there is a new image processor. That's not the question. I want to know if this new sensor resolves for a better image quality than the iPhone 6 s plus. Practically speaking, is it the 7 plus camera image sensor a better film?
Knowing the optics are improved for better optical resolution. Has a sharp edge protruding past the phones surface. Does anyone know if there is any place that sells the parts of the IPhone 7 plus? I am a new repairer so I want to know where I can find these parts and also the screws and screwdrivers that were used to assemble this.
I tried searching this online but most online shops have only iPhone 6s plus parts at the most. Just purchased the iphone 7 recently from wantITbuyIT and now im waiting for google pixel. The battery life is good unless you are doing something that involves a lot of processing power.
There are indeed gaskets in the buttons, you can see them in the iPhone 7 teardown! I was replacing an iPhone 7 Plus screen and when I opened the phone up all the screws looked stripped. So I had to figure out any which way to get the screws out. I did and then I replaced the screen. We have a chance to guarantee our right to repair electronic equipment—like smartphones, computers, and even farm equipment.
This is a once-in-a-generation chance to protect local repair jobs—the corner mom-and-pop repair shops that keep getting squeezed out by manufacturers. Join the cause and tell your state representative to support Right to Repair. Tell them you believe repair should be fair, affordable, and accessible. Stand up for your right to repair! Aidez à traduire iFixit. Vue éclatée de l'iPhone 7 Plus.
Outils recommandés dans ce démontage Acheter ces outils. Introduction Depuis l'annonce de la sortie de l'iPhone 7 faite par Apple, nous avons attendu avec impatience l'occasion de pouvoir fouiller dans leur dernière, leur plus grande technologie. Étape 1 Vue éclatée de l'iPhone 7 Plus. Which carrier phone is this. I want to make my iphone at home , but from where i should get the parts??? Does it have a DAC in it? If so which one? The DAC is in the iPhone.
How it's for the speakers too. One of them supports CDMA, the other does not. Outils utilisés dans cette étape:. It's not waterproof, it's water-resistant. Similar, but not the same. How are the pentalobe screws protected from water? Is there rubber gusket? That's the TouchID sensor. The Glue is silicone ferrite add with adhesive to deflect Cellular transmission effectively. Yeah where can we get "genuine Apple" seals? As long and convoluted as the prox has become, there should've been a close-up.
There is space for audio jack up there! Then why not use Torx? But what size of tri lobe is it? Like apple watch y0. Lets add more screw variant each new release Touchpad is also in the latest MacBook Pro laptops. I agree, likely used to cut down on wind noise low frequencies the mic could pick up. A Taptic could also be used as a subwoofer, due to its low resonant frequency of about Hz.
Are there pins on both sides of the Lightning port. First day on ifixit? That tore down a lot of other stuff too. Tearing down Samsung products is too dangerous. When playing audio, can the Taptic Engine act as a passive bass radiator? Cam someone just tell me the list of screwdriver sizes needed to take a iphone 7 apart. Or a piezo device? I'm guessing voicecoil based on the X-Ray. So this is the device that replaced the audio jack? What X-Ray equipment do you use? Do you sell this device?
And how are we to do that? Let it run down normally? Seems like thatd take a while. The new efficiency of the iPhone 7 plus allows a smaller battery and lighter weight.